How To Repair Burn Hole North Face Coat

Are you ill of feathers leaking from your downward jacket? Need to gear up a burn pigsty in your puffy? Nosotros have a simple fix to rips, tears, and holes in down or nylon jackets, ski pants and snow gloves. From GORE-TEX® rainwear to The North Face® parka, hands patch your favorite waterproof garments without dampening its look or way. All y'all need is some clear or blackness nylon repair tape or gear patches.

Wash & DRY

Earlier making a patch repair, clean downwards and nylon gear outset. Using our Revivex formulas, hardworking ski jackets, pants, and rainwear stay fresh and will continue to protect u.s. from the elements. Read our blog to learn how to launder GORE-TEX fabrics or observe out how to wash down jackets so they go on performing at their best.

Peel-AND-STICK PATCH REPAIR

Tenacious Record Mini Patches or Tenacious Tape Gear Patches
Isopropyl Booze

Estimated Time: 5 minutes

Clean the repair area with isopropyl booze to remove any dirt or body oils that may forbid a good bail. Trim any loose threads or feathers.
Peel off the bankroll on a Tenacious Tape Mini Patch or Gear Patch and utilise it over the rip, tear, or pigsty. Patch should overlap tear past 0.5" (12 mm) in all directions.
Employ pressure from the centre out. Smooth out any bubbles and ensure the edges lay flat.

If you practise a repair before cleaning the gear, wait at to the lowest degree 24 hours for the Tenacious Tape patch to attach properly earlier washing it.

PRO TIP: Make your repair nearly invisible by using clear, black, red or yellow Tenacious Tape to match the fabric. If you lot're patching a hardshell jacket, put the patch on the within.

IRON-ON PATCH REPAIR

Tenacious Tape GORE-TEX Fabric Patches
Fe, Hair Dryer, or Machine Dryer

Estimated Time: 15 minutes

When extra strength is required especially for loftier-wear areas (e.thou., cuffs and knees), apply heat on the Tenacious Record Mini or Gear Patch after application on the outerwear. For repairs on waterproof-breathable fabric that get more than wet and scrapes, use Tenacious Record GORE-TEX Material Patches with heat.

Clean and dry area to be repaired.
Peel off GORE-TEX Textile Patch backing and apply to damaged area.
Apply pressure from center out to remove air bubbles.
Set the atomic number 26 to medium or permanent-press heat. Use moderate pressure and circular motion for 30 seconds to heat evenly.
(Optional) Instead of an atomic number 26, use a pilus dryer or tumble the garment in a machine dryer for 30 minutes on regular setting to strengthen the repair patch.

PRO TIP: Cutting Tenacious Record to size by rounding out the edges to forbid the patch from snagging or peeling off before it fully bonds to the fabric.

Keeping downwards puffy coats, nylon jackets, and GORE-TEX gear in tip-top shape is uncomplicated with Tenacious Tape repair patches and Revivex cleaners.